Dicolor X-Plus series “One-click panels connection method”
Mar 15, 2018
In the modern and intelligent today, people’s consumption demand of material has gradually changed. Like the LED display from the earliest visual consumption to the pursuit of today’s user experience.
Being engaged in the LED display industry, debugging staff may know that a normal operation of the display is to go through these steps of the screen screen body structures, signal and power wiring and software debugging. Software debugging needs certain technical basis of the resolution of the screen, the receiving card parameters, screen body alignment, etc. Therefore, In the modern and intelligent today, people’s consumption demand of material has gradually changed. Like the LED display from the earliest visual consumption to the pursuit of today’s user experience.
Shenzhen Dicolor Optoelectronics Co.,Ltd. studied the points that customers feel troublesome during the debugging of display software and developed X-Plus LED display series which are with one key with screen function and solves the long-term problems indeed .What is the magic weapon like? Let’s make comparisons firstly：
The advantages of ” One-click panels connection ” from Dicolor
1.Don’t need your step-by-step sequence of signal wiring; 2.You don’t need to check the actual alignment behind the screen first when debugging; 3.Do not need you to clear the screen lines by a few calls when proceeding remote debugging. 4.Do not need checking every line in topography diagram during the software configuration with the screen.
As shown in the above picture, in the conventional software debugging operation you should be familiar with number of combinations of display cabinets on site and receiving card and go through 1-2-3-4-5 steps in above picture to complete the debugging work of display.
Then the Dicolor X-Plus series LED display cabinets are embedded in intelligent hardware which identify the cabinets alignment automatically. You needn’t setting the number of combinations of cabinets, the serial number of network port and the size and other parameters of the receiving card during the software debugging operation. You only should click “one key with screen function” on the software to complete the debugging, as shown in below picture:
Is not it amazing? And the actual box alignment isn’t like the previous wiring step by step. In some applications, the LED screen needs to display connection creatively or the routing space constraints and other reasons, the way the line is showed irregularly.Then this feature is very suitable for customers . Customers needn’t to go to the scene or contact the on-site staff to understand the cabinet alignment no longer, or are confused with the signal input of receiver card array or front view or dorsal view, etc., But now you only need to click a button to complete it!